|
MAIN ASSEMBLY
Item Description (Part Number)
QTY: 15- Top Nailing Bracket (646-127) +$51.60
QTY: 16- Side Standoff [2 per unit, each sold separately] (646-126) +$Call to Order
QTY: 17- Faceplate (646-910) +$328.00
QTY: 18- Stainless Side Panel [2 per unit, each sold separately] (646-117F) +$83.33
QTY: 19- Burner Tray Cover (646-116F) +$186.85
QTY: 20- Stainless Cover Plate [2 per unit, each sold separately] (646-115) +$75.32
QTY: 21- Panel Clip (326-034) +$12.26
QTY: 22- Burner Assembly (SEE BELOW) +$Call to Order
QTY: 23- Front Glass (940-488/P) +$181.74
QTY: 26- Stainless Back Panel (646-114) +$245.68
QTY: 27- Rear Panel (646-113) +$176.62
ITEMS NOT SHOWN - MAIN ASSEMBLY
Item Description (Part Number)
QTY: 28- Rear Panel Bracket (646-125) +$10.95
QTY: 29- Glass Clip (646-108) +$Call to Order
BURNER ASSEMBLY
Item Description (Part Number)
QTY: 1A- Valve Assembly - NG (646-574/P) +$603.07
QTY: 1B- Valve Assembly - LP (646-576/P) +$609.68
QTY: 2- Valve 886 Sit IPI - NG (911-004) +$222.66
QTY: 2A- Valve 885 Sit IPI - LP (911-005) +$204.76
QTY: 3A- Pilot Assembly IPI 2 Flame LP [recommend using High Temp Red Silicone and replacing gasket] (911-007) +$104.67
QTY: 9- Burner Orifice #11 - NG (905-012) +$40.92
QTY: 9A- Burner Orifice #42 - LP (904-430) +$46.26
QTY: 10- Ignition Control Board [DFC] Sit IPI (911-012) +$189.41
QTY: 11- Flame Sensor (911-037) +$77.99
QTY: 12- Flame Electrode (911-038) +$77.99
QTY: 13- Novasit Pilot Tubing with Nuts (910-432) +$40.92
QTY: 14- Two Way Pilot Hood (911-039) +$51.60
QTY: 15- Pilot Hood Clip (911-137) +$17.86
QTY: 16- Pilot Shield [2 per unit, each sold separately] (911-034) +$Call to Order
QTY: 17- Burner Tube Assembly - NG/LP (646-525) +$253.35
QTY: 19- Stainless Steel Burner Tray (646-030) +$271.26
QTY: 20- Drainage Bracket [2 per unit, each sold separately] (911-054) +$Call to Order
QTY: 21- Nailing Strip [each] (646-032) +$51.60
QTY: 22- Valve Side Cover Plate (377-047) +$Call to Order
QTY: 23- Pilot Shield Support Bracket (377-048) +$12.26
QTY: 24- Offset Bracket (377-030) +$48.93
QTY: 25- Burner Tube Support [each] (377-024) +$118.01
QTY: 26- Component Top Cover Plate (377-052) +$Call to Order
QTY: 30- Inner Trim Stainless Steel (646-936) +$288.00
ITEMS NOT SHOWN - BURNER ASSEMBLY
Item Description (Part Number)
QTY: 31- Regulator for 886 Sit - NG (911-008) +$91.33
QTY: 32- Regulator for 886 Sit - LP (911-009) +$91.33
QTY: 33- Orifice Sit Pilot #62 - NG (910-100) +$30.12
QTY: 34- Orifice Sit Pilot #35 - LP (910-101) +$34.40
QTY: 35- Valve Wiring Harness with IPI/CPI Switch (911-013) +$107.34
QTY: 36- On/Off Switch Wire (911-019) +$60.79
QTY: 37- Wire 9 Volt Battery Entension (911-086) +$24.52
QTY: 38- Allen Key 5/32 Long (904-529) +$12.26
QTY: 39- Gasket for Rear Relief Plate (260350) +$34.40
QTY: 40- Label Natural Gas (908-529) +$12.26
QTY: 41- Label Propane Red (908-528) +$12.26
QTY: 42- Connector Clamp 3/8 CI -804 (904-687) +$12.26
QTY: 43- Battery Holder with 9 V Snap 4 Cell Stack AA (911-018) +$27.32
QTY: 44- Tubing Stainless Steel Flexible 3/8 X 12 Inch (932-012) +$34.40
QTY: 45- Fitting Elbow 90 Degree Forged [Valve Outlet End] (904-629) +$30.12
QTY: 46- Fitting Elbow 90 Degree [Burner Orifice End] (904-600) +$15.06
QTY: 47- Fitting Straight Adapter 1/8 Pipe Mxf1.515Inch [Burner Orifice End] (904-899) +$34.40
QTY: 48- Inlet Flex Line Gas Stainless Steel Steel 24 Inch (904-658) +$51.60
QTY: 49- Double Gang Front Cover (911-087) +$112.68
QTY: 50- Double Gang Box Grey (911-088) +$271.26
QTY: 51- Wall Switch - White (910-363) +$24.52
QTY: 52- Plastic Snap Bushing [Hardwire Kit] (910-179) +$12.26
QTY: 53- Electric Duct Plastic Cover [Hardwire Kit] (911-231) +$123.35
QTY: 54- GFCI Outlet 15 Amp 125 Volt Duplex [Hardwire Kit] (911-232) +$153.60
QTY: 55- Blank Adapter Plate White [Hardwire Kit] (911-233) +$60.79
QTY: 56- Box Switch Rectangular Two Gang [Hardwire Kit] (911-088) +$271.26
QTY: 57- Power Adapter Ac/Dc 7V [Hardwire Kit] (911-090/P) +$Call to Order
QTY: 58- Grommet Strain Relief [Hardwire Kit] (910-178) +$12.26
| 
Continue Shopping